- Platform Beam
- Climbing Bracket
- Tensile Bolt
- Safe pin
- Suspended Platform
- Sector Plate
- Position Disk
- Walling to Bracket
- Pull Push Prop
- Connecting Shoe
- Pin
- Minitrim Set
Title1
1. Fix anchor system on the plywood by position bolt.
2. After the concrete pouring finished, take out the position bolt and remove the formwork.
3. Fix the tensil bolt into the V-climbing cone.
4. Lift the climbing bracket and hang it on the tensile bolt, then insert the safe pin. Make sure the bracket and tensile bolt are fixed firmly
5. After the next lift, tensile bolt and V-climbing cone can be taken out for reusing. Then fill the holes left by V-climbing cone.
Title2
|
Weight (kg) |
Item No. |
|
|
Tensile bolt M36/L=80 |
1.22 |
99000190 |
|
V-climbing cone M36/D20 |
1.77 |
99001203 |
|
High-strength rod D20/L=300 |
0.81 |
99000241 |
|
Anchor plate D20 |
0.65 | 99000102 |
Title3
| Weight (kg) |
Item No. |
|
| Climbing bracket | ||
| DXB-180 | 154.29 | 01220100 |
| DXB-240 | 198.72 | 01230100 |
| Vertical walling H-3285 | 97.49 | 01220200 |
| Mini trim set | ||
| DXB-180 | 18.86 | 01220300 |
| DXB-240 | 20.60 | 01230300 |
| Pin for vertical walling | ||
| Ø25/L=250 | 0.92 | 01220400 |
| Connecting shoe | 6.17 | 01220500 |
| Pull-push prop | ||
| Adjustable range: 1900-2700 | 35.04 | 01220600 |
Title4
| Weight (kg) | Item No. | |
| Upright of suspended platform H=2160 | 22.84 | 01220800 |
| Platform upright H-1600 | 6.72 | 01220900 |
| Safe pin Ø25 | 1.1 | 01221300 |
| Walling-to-bracket holder | ||
| 1. Part1 | 0.92 | 99000234 |
| 2. Washer plate 60x140 | 0.60 | 99000075 |
| 3. Wingnut D15 | 0.40 | 99005052 |
| Position bolt M36/L=50 | 0.80 | 99000112 |
Title5
| Weight (kg) |
Item No. |
|
| Platform beam | 12.62 | 01221000 |
| Cast adjusting spindle | 3.53 | 99000235 |
| Sector Plate | 2.17 | 01221100 |
| Position Disk M36/L=40 | 0.38 | 99000402 |
| Wall-attached support | 2.5 | 01221200 |
| Spring cotter Ø4 | 0.023 | 99000502 |
